Numerical Investigation of the Capture of Polydisperse Particles by Charged Droplets

The capture of particles by charged droplets was simulated by considering the electrostatic interactions of droplet-droplet and droplet-particle. The results indicate that the electrostatic repulsion between droplets leads to a dynamic accumulation mode of particles. However, the droplet spacing has an insignificant effect on the capture efficiency when the electrostatic deposition predominates. The increase of droplet charge remarkably improves the capture efficiency, in which the capture of fine particles accounts for the largest proportion. Compared to the droplet charge, the droplet size shows a limited improvement in the capture efficiency. Reducing the droplet velocity prolongs the capture time instead of enhancing the capture capacity per unit time, thereby improving capture efficiency.     

基于VERICUT的偏心放置分段式齿圈铣齿方法研究

为解决大直径且齿宽较宽的分段式齿圈的铣齿问题,提出采用偏心放置的主程序调用子程序循环加工的铣齿方法。根据主程序数学模型和子程序数学模型构建偏心放置铣齿方法的数学模型,基于VERICUT的仿真模型和仿真主、子程序,实现齿槽的开粗和精铣仿真加工;通过VERICUT对比分析功能模块,以齿面残留模型为依据,验证了偏心放置铣齿方法的可行性。     

Influence of Sm and Cd co-substitutions on physical,magnetic, Mössbauer,electric, and dielectric properties of Co2X hexagonal ferrites in presence of a hematite phase

X-type samarium-cadmium co-substituted hexaferrite with compositions Ba_2-xSm_xCo₂Cd_yFe_28-yO₄₆ (0.00 ≤ x ≤ 0.08, and 0 ≤ y ≤ 0.4) were prepared at 1340 °C using a simple heat treatment technique. All heated samples were characterized using FTIR, XRD, SEM, VSM, M?ssbauer, and low-frequency dielectric measurements. XRD analysis of prepared samples shows the formation of X as a major phase along with hematite. The M_S value varied from 67.01 Am²/kg to 50.43 Am²/kg; whereas the H_c value changed from 2.95 kA/m to 6.17 kA/m, A high value of M_S (67.01 Am²/kg) is observed in the pure sample, and a very low value of H_c (2.95 kA/m) is observed for x = 0.06, y = 0.3 compositions, but Mr/Ms < 0.5 confirm the multi-domain nature of prepared hexaferrites. Hysteresis loops of all samples are narrow, and confirmed that formed samples belong to magnetically soft. Mössbauer spectra of the three samples (S1, S3, and S5) show the existence of doublets. Significantly low values of coercivity, retentivity, and loss tangent in Sm–Cd substituted samples signified those prepared materials can be used to design electromagnets, transformer cores, electric motors, and maybe a potential candidate for lossless low-frequency applications.     

A globally convergent BFGS method for pseudo-monotone variational inequality problems

In this paper, we propose a globally convergent BFGS method to solve Variational Inequality Problems (VIPs). In fact, a globalization technique on the basis of the hyperplane projection method is applied to the BFGS method. The technique, which is independent of any merit function, is applicable for pseudo-monotone problems. The proposed method applies the BFGS direction and tries to reduce the distance of iterates to the solution set. This property, called Fejer monotonicity of iterates with respect to the solution set, is the basis of the convergence analysis. The method applied to pseudo-monotone VIP is globally convergent in the sense that subproblems always have unique solutions, and the sequence of iterates converges to a solution to the problem without any regularity assumption. Finally, some numerical simulations are included to evaluate the efficiency of the proposed algorithm.     

A design method of data analytics process for condition based maintenance

Many condition monitoring systems use data analytics processes such as anomaly detection to understand machine conditions. Such data analytics processes have been designed by data scientists. However, domain knowledge is indispensable for designing the process, and data scientists have difficulty in acquiring such knowledge from domain engineers. This paper proposes a design method of data analytics processes and an engineering tool. In this method, data scientists propose hypotheses about each step of the process to domain engineers. Then, data scientists update the process on the basis of feedback from domain engineers. The engineering tool helps data scientists to interact with domain engineers.     

ADS实验大厅中子防护工程技术研究

为了保障加速器驱动次临界系统(ADS)散裂靶与反应堆耦合特性及影响验证实验的顺利进行,以原子能院现有的临界实验装置为基础,对堆厅部分墙体进行屏蔽改造。建造由聚乙烯、镉、铅、钢以及混凝土等材料构成的屏蔽装置,以防止临界装置产生的射线外泄,使工作人员受到的照射保持在合理水平。通过MCNP模拟计算,完成了屏蔽结构的优化设计。基于槽钢支撑结构、铅屏蔽层、镉屏蔽层和聚乙烯屏蔽层等材料组成的组合屏蔽结构建立简化模型,采用ANSYS有限元分析程序计算分析得出各部分应力小于许用应力,稳定性符合要求。最后通过工程实践,完成对屏蔽性能理论计算结果的验证。     

某矿快速掘进最优炮孔间距的选择

山西某矿5308底抽巷在掘进过程中速度慢、效率低，直接影响工作面的瓦斯抽采，为了改善上述情形，对炮孔间距进行研究。通过使用ANSYS软件对不同炮孔间距下快速掘进效果的模拟分析，并经现场验证，得出了适应该矿的最佳炮孔间距。结果表明：炮孔间距为500 mm时，爆破产生裂隙发育范围和岩石损伤区域都最大，快速掘进的效果最好。     

基于概要数据结构的全网络持续流检测方法

持续流是隐蔽的网络攻击过程中显现的一种重要特征，它不产生大量流量且在较长周期内有规律地发生，给传统的检测方法带来极大挑战。针对网络攻击的隐蔽性、单监测点的重负荷和信息有限的问题，提出全网络持续流检测方法。首先，设计一种概要数据结构，并将其部署在每个监测点；其次，当网络流到达监测点时，提取流的概要信息并更新概要数据结构的一位；然后，在测量周期结束时，主监测点将来自其他监测点的概要信息进行综合；最后，提出流持续性的近似估计，通过一些简单计算为每个流构建一个位向量，利用概率统计方法估计流持续性，使用修正后的持续性估计检测持续流。通过真实的网络流量进行实验，结果表明，与长持续时间流检测算法（TLF）相比，所提方法的准确性提高了50%，误报率和漏报率分别降低了22%和20%，说明全网络持续流检测方法能够有效监测高速网络流量。     

基于种群划分与变异策略的粒子群优化算法

粒子群算法因其形式比较简洁，参数设置灵活，操作简便易行，并且能够快速收敛，从而引起广泛关注。但是传统的粒子群算法也有缺陷：收敛速度慢以及容易陷入局部最优等。针对这些问题，本文借鉴小生境的方法，在进化初始阶段，对种群进行划分，将初始种群分为子种群，对不同的子种群进行不同的变异策略；在进化过程中，针对不同的子种群，设置不同的惯性权重因子ω，用来增强全局搜索能力与局部搜索能力。实验结果表明，本文提出的算法较传统的粒子群算法具有较快的收敛性以及找寻的全局最优解更接近真实解集，收敛精度比较高。